In order to provide complete functionality this website needs your consent to store browser cookies. If you don't allow cookies, you may not be able to use certain features of the website including,but not limited to log in, order services, see personalised content or switch between languages. It is recommended that you allow cookies. More information

Losses

The importance of reducing electrical losses on distribution networks is growing.  As electricity usage increases, the control of losses to an economic level will become a key feature of network operation. It has only been in the RIIO-ED1 period that DNO’s have started to publically document a Losses Strategy. The energy lost in distribution creates a financial cost which is fronted by the customer. DNO’s are obliged, as part of their license, to reduce losses on their networks as far as reasonably practicable. Reducing the energy lost will reduce carbon emissions, which impacts climate change. Reducing losses effectively increases the network capacity. This is crucial with energy consumption likely to increase sharply in the near future, as a result of The Carbon Plan and the uptake of new technologies such as electric vehicles and heat pumps. By reducing losses wherever possible, it could reduce the need for costly network reinforcement projects.

Western Power Distribution is committed to driving down customer costs and carbon emissions. Hence the company are doing as much as possible to reduce losses, although a certain economic level of losses are required in the normal running of the network.

The long-established electricity network of the United Kingdom is shown below: 

A Traditional Electricity Network



Over the past circa eight years large amounts of distributed generation have been added to the existing WPD electricity network which adds to the issues faced by DNO’s. The typical arrangement exists with the distributed generation is shown below:




The total quantity of electricity supplied in the United Kingdom during 2015 was 338TWh, but only 311TWh was consumed by customers. The difference between these two values is known as the electrical loss. Ofgem quote a societal cost of £42.48/MWh for losses. 

Distribution network losses can be broadly defined as the difference between the electrical energy entering the distribution network, from base generation or embedded generators either upstream / same level / downstream networks, and the electrical energy exiting the distribution network, for consumption purposes and properly accounted for it, in percentage terms for a particular period.



Raw levels of losses in kWh are of significance for any DNO, but a direct comparison with other DNO losses levels is more difficult: indeed, DNO losses depend not only on the network structure, but also on network energy flows.

Losses rates make a comparison between loss and energy flow levels. Consequently, they provide reference values that may be rather comparable between networks, even if they are detailed by voltage level for relevant benchmarks.
This page provides an introduction to the concept of losses; an explanation of what can be done to reduce them and a comprehensive list of what Western Power Distribution are doing to limit them. More detail on all of these topics can be found in our most recent losses strategy. 

 

What causes Losses?
Changes to Losses as our network changes
Losses Management
Our actions on Losses

 

Contact us

Emergency information

0800 6783 105

General contact enquiries

0800 096 3080